So, you’ve got your quarter round. Find out the types of quarter round, how to cut quarter round, best quarter round cutting tool and install quarter round without a nail gun.
In this Learning guide, we’ll discuss:
- What are the types of quarter round.
- How to cut quarter round.
- Best quarter round cutting tool.
- How to install quarter round without a nail gun.
What Are The Different Types of Quarter Round?
MDF is short for (medium-density fiberboard) and is a more and more used trim type by contractors and homeowners as its doesn’t split, easy to install. Out of the three types of Quarter Round MDF is the most cost-effective high-end trim to use. Also, its smooth finish makes painting easy!
This is a plastic wood style trim that is now and again used for molding and baseboards. It’s a foremost trim desired due to the fact it’s lightweight, durable, and handy to install. It’s additionally resistant to moisture, not like different substances that both swell or are in any other case ruined when they come in prolonged contact with water or any types of moisture.
Wood is a popular choice with homeowners. Positives of using wood: the wood will not crack after installation. Cons of using wood: can be a little tricky to install.
This quarter round cutter can be adjusted from 45 to 135 degree, flexible and accurate. It is designed with a soft rubber handle, provide you comfortable touch feeling. No marking, no sawing, no sanding, no splinters just a clean smooth cut, it will save a huge amount of time and energy for you.
This Miter cutter has a built-in stencil for angle cuts. It cuts smooth and clean. Incredible precision multi angle miter cutter works great for 1/4 rounds cutting, any small miter job or science projects.
This miter shears are ideal for cutting chamfer, round molds and pvc strips, rubber gaskets, molding and weatherstrip, the cut is fast, clean and flat. Good for thin wooden board cutting, plastic material cutting, etc.
How To Cut Quarter Round- 5 Steps
Check out these easy steps and the video below to see how this way works:
Step 1 – Measure the wall.
Step 2 – Cut the quarter round molding
Step 3 – Mark the corner position on the mounding.
Step 4 – Create miter cut on the molding with the suggested tools.
Step 5 – Attach newly cut quarter round to the wall.
Table of Contents
Best Quarter Round Cutting Tool
If you want to install quarter round without the expensive tools and saws, we have reviewed one type of tool that is inexpensive to add to your tool kit and will get a lot of use for enhancing your home with trim and quarter round installs.
These multi angle miter shear cutters work fast and easy!
- Easy to use
- Wide Application Use
- Low Cost Option
- Need to buy replacement blades
Tip: The cut items should be under ¼ inch in thickness, it is not suitable for metal cutting!
How To Install Quarter Round Without A Nail Gun
Have all your quarter round cut and ready to go. Place all the quarter round pieces in front of the area. You are going to need to have the following tools:
Put down the first cut piece of quarter round against the wall. Get your hammer and several finishing nails. Really bang the hammer as you are going to need the nail to reach the baseboard. Don’t bang the nail in all the way. Leave out about 1/8 inch of nail for the finishing part. Keep doing this with all your cut pieces of quarter round trim.
Once you have installed the quarter round let go back to do some finishing touches. Grab your nail set and pick a nail set that will be smaller than the finishing nail head.
Put the nail set on the nail head and drive the remaining finishing nail all the way into the quarter round trim.
Once you have completed this on all the trim go back and fill the holes with putty so it’s easier for painting and the hole will no longer be visible.
There has been a lot of tips provided for installing quarter round. We provided detailed information about installing quarter round without a nail gun and how to install quarter round with adhesives.
Hopefully one of these techniques we’ve gone over today worked for you.
Remember to check back often for more tips and tool options for all your home improvement projects.