Fast Home Repairs with a Tape
With duct tape, some homes are really held together. Although it’s not a brilliant idea to rely on it for all your maintenance work, for all sorts of fast home repairs, there’s no doubt it comes in handy. In addition to this all-purpose tape, there are significantly different special tape types for particular DIY jobs.
In your DIY pack, there are four key styles of tape you need:
This tape is made for the shielding of electrical wires. Usually, it is made of vinyl, which extends well and has strong insulation. This tape will be used in winter to patch broken wires or protect the pipe so they don’t freeze. It comes in various colors and costs about $4 a roll. A quality, low-cost alternative is offered by Tape Brothers” vinyl tape.
Having a dense, woven backing, this extra-sticky tape is easy to cut to the length you want. For something from patching a ripped tarp or re-attaching the handle to a split bucket, you can use it. Ironically, the only thing it can’t remedy is the duck since they don’t hold up well to heat. Most duct tape is silver, but it comes in vivid, easy-to-find colors as well. It costs about 4 dollars a roll. A high-quality alternative is Duck Brand’s Duct Tape.
Fast Home Repairs with a Plumber’s Tape
This is a small, light PTFE tape made from (Teflon). It helps form a more robust seal as you apply it to the threaded end of the tubing. Teflon tape and thread binding tape are other names for it. It costs roughly a dollar a roll. TOOGOO sells, at a reasonable price, PTFE tape.
Painter’s Tape – Painting easier than ever
The tape of a gently glued painter is easy to detach from a surface without destroying it. Before you paint a wall, the essential function is to cover moldings or the sides of ceilings to spill over. You should even add it to tubing to prevent them from scraping the teeth of your pliers. It costs around $5 for a roll of inch-wide painter’s tape. The trick can be done with Scotch safe-release tape. To prevent common errors, refer to this guide from Painters Care before submitting.
In several cases, getting tape in your tool kit saves you money. For, e.g., instead of going out and spending $50 on a new one, you can use duct tape to patch a broken tent. It will avoid expensive leakage by using plumber’s tape on pipes. Until painting, taping off your molding with painter’s tape saves it from damage, so you don’t need to repaint it later.
Fast Home Repairs: Hardware
Just like a nail without a hammer is no use, a hammer without nails is worthless. If you have a range of nails and screws on hand, any time anything wants a fastener in your home, you won’t have to run out to the hardware store.
Nails come in a wide variety of shapes, several inches long, from small finishing nails to spikes. In “pennies,” abbreviated as “d”: 8d, 10d, and so on, nail sizes are sometimes listed. A penny is not an actual unit of length, however. Alternatively, the term corresponds to what nails of varying sizes used to pay.
Screws differ not only in scale but also in form. Some are intended for wood fastening, others for drywall attaching products. They can be made from various materials as well.
Just buy a packaged assortment of nails and screws if you’re building a toolkit from scratch. This also comes with other valuable hardware pieces, such as image hooks or wall anchors. A low-cost 347-piece hardware package is rendered by GS Tool. If you want to create your own set, however, here are a few styles to include:
For minor fixes, small 3D nails, 1.25 inches in thickness, are handy. You will use them to hang pictures as well.
For constructing decks and other outdoor projects, you will require rust-resistant wood screws. These may be coated with stainless steel or made from it. 1.25 inches, 1.75 inches, 2.5 inches, and 3 inches are proper measurements.
They have a vinyl layer that makes it easy to hammer in and more complex to dig out for fast repairs at home. For large construction jobs that you want to keep together, large 16d vinyl sinkers are fine.
For more minor work, medium-sized 8D sinkers are fine.
These screws have a black phosphate coating. They are intended to connect drywall to studs, but you can use them for almost any indoor worm. Experts recommend that multiple screw sizes be left in place: 0.75-inch, 1.25-inch, 2-inch, and 3-inch.
Such nails have a rust-resistant finish that makes them perfect for outdoor work. For small exterior construction projects, you can use 8D galvanized nails and 16D nails for deck repairs.
With plenty of nails and screws to deal with, instead of calling in a pro, you can do all sorts of repairs. E.g., a broken patch of drywall or a missing board on your deck may be replaced.
Utility Knife – Efficiency!
Many cutting jobs are tricky to do with scissors, such as opening boxes or trimming wallpaper. For these people, a sharp knife is the best weapon. The best type is a utility knife. Inside the handle, the blade is kept so it can’t cut you by mistake, and you can stretch it if needed. For shaving wood, marking notches on boards, and sharpening a pencil in a pinch, a utility knife is also handy.
A decent home utility knife has a handle that is clean and convenient repairs. It should preferably have built-in room for extra blades as well. That way, instead of plowing along with a dull blade, you’re more likely to adjust the blade as appropriate, which is an excellent way to cut yourself.
For about $10, you can get a knife with all of these features. A robust, simple utility knife is made by Stanley. You may obtain one that opens and shuts with one hand and locks it into distinct locations for an additional $5 or so. This saves time when on the one hand, you need to catch something and cut it with the other. Another good element is a belt hook for transport. A compact choice is Gerber’s EAB Lite Pocket Knife.
For any function that needs cutting, such as assembling carpet, wallpaper, or vinyl flooring, a service knife is an essential tool. It makes it easier to do these jobs yourself rather than calling in the pros with a decent knife at the ready.
Toolbox – Your all-in-one bag!
You need somewhere to store them until you’ve put together a full selection of instruments. When you need them, a robust, well-organized toolbox will help you locate your tools. In between uses, it can also protect them from injury.
To house all the instruments, you use daily; a decent toolbox should be big enough. It should be durable and easy to carry as well. The lid and lock should be safe so that the box doesn’t open, and the instruments fall out.
There are compartments inside several toolboxes to arrange your instruments, so it’s easy to lay your hands on the one you want. Handy is a lift-out tray for small objects, such as hardware. Getting so many compartments, though, restricts the ways that you can use the box.
Experts claim the best type to use is a vertical tool bin. It vertically stores your instruments so that you can see all of them clearly. It’s much easier to bear than a horizontal, unwieldy box.
For about $30, you can get a durable “work set” with lots of organizers inside. A safe alternative is Stanley’s one-latch toolbox. Or, for about $25, you can purchase a bucket liner tool organizer. This is a durable fabric sleeve that slips over an economic five-gallon bucket. Larger instruments can go around the bucket’s interior, and smaller ones can go around the outside in bags. Bucket Boss has a model 10030, which is tested and durable.
A decent toolbox for fast home repairs doesn’t actually save money for you, but it saves time for you. It’s a real pain to go fumbling in a cluttered bin searching for the right instrument while you have a fix to make. A decent toolbox keeps all your equipment at hand so you can get on with the work.
For some work, a putty knife, often referred to as a scraper, is handy. You may use it to add wood putty or spackle to smooth it over, scrape off peeling paint or wallpaper, or remove caulk around a bath or a window. Before applying it, the thin blade is also helpful for prying open a can of putty. Afterward, you should bang the lid closed again using the handle end.
The most suitable size is a putty knife with a blade 1.5 inches long. It is small enough to fit into corners, but it is deep enough to quickly fill big holes.
The finest putty knives have flexible stainless-steel blades that are easy to clean and won’t rust. To give you ample leverage, the handle should be secure and long enough. Without costing more than $6 or $7, you will get all this. An acceptable, cheap alternative is Warner’s ProGrip Full Flex Putty Knife.
Instead of turning them over to contractors, your putty knife will assist you with all forms of work. In newly built drywall, you can use it to patch walls or “mud” the cracks, an expensive job to get done correctly. For re-glazing windows, a putty knife is also required.