Deciding whether to do it by yourself (DIY) or employ a home repair contractor is not always easy. One gain is noticeable, however: DIY home repairs will save you a bundle. To save money on home decorating, house cleaning, vehicle repairs, landscaping, and more, you can use DIY tricks.
Getting a well-stocked toolbox at the ready is one of the secrets to saving money on DIY. But at the hardware store, you don’t want to go out and buy any tool just for the chance that you may use it. It makes better sense to spend your budget on a few pretty good instruments you’re going to use over and over again.
Fortunately, to be prepared for home crises, you do not need too many resources. Approximately a dozen instruments should be enough to get you through the most straightforward fixes.
The Basic DIY Toolkit
There are some resources a DIYer requires, according to experts. In-home repair work, these simple tools, such as a hammer, an adjustable wrench, and a screwdriver kit, occur repeatedly. Without them, no toolbox is complete.
Home Hammer for DIY repairs
Without a hammer, a nail is no good. Opposite the head, most hammers have a claw, meaning one end can be used to push in nails and the other to pry them out. For any task involving a hard whack, such as smashing up a plaster wall or pounding building timber into place, you should even use a hammer.
Carpentry experts agree that a 16-ounce hammer with a flat head and a curved claw is the most potent type of hammer. This scale can be used for delicate tasks, such as hanging images, and heavier ones, such as fixing a deck. The angled claw makes it easier to pull nails.
It costs less than $15 for a standard alternative with a wooden or fibreglass handle, such as this BASTEX hammer. However, you can get a metal-handled hammer that’s just one piece, from head to foot, for an additional $10 or so. The B3-3LB model by Estwig is highly classified. Experts believe that this form is almost indestructible. Since you will be using this instrument a lot, when you swing it, aim for one that feels easy to grip and well-balanced.
Instead of springing for pricier pieces in their completed state, a strong hammer makes it easier to shop cheap furniture ready-to-assemble. It even saves you money on schemes for home renovation. You can do your demolition using your trusty ax, even though you plan to employ a contractor from Handy.com for much of the work. For occupations that are not home-related, such as applying new heel tips to sneakers, hammers also come in handy.
Precise measurements are a must in DIY professions. To check the size of a wire, hang an illustration in the correct position, locate the wall section to be decorated, or measure the room where a new appliance has to fit. You need a decent tape measure. Builder Doug Mahoney, writing for The Sweethome, says, “the single most used instrument on a worksite” is a tape measure.
You need a locking and retracting tape measure for DIY work. When you put one end of it in order, you will feed the tape constantly without having to keep it back, and it will remain fed out as measurements are jotted down. When done, at the click of a button, you should be able to retract the tape.
Buy on tape measure on Amazon
The cheapest measure for retracting tape is 12 feet long and costs around $5. However, experts claim that it’s worth spending $10 to $20 for a robust 25-foot tape measure. To do more considerable DIY work, such as calculating huge spaces, this scale is large enough. Komelon produces a self-locking model which is well-reviewed.
Durability is vital as well. Both the case and blade should be durable, and it should be easy to use the locking lever with one hand. The tang (the metal hook at the end of the tape) should still be big enough to grip it tightly anywhere you place it, but not so large that it gets stuck on anything nearby. As it makes the instrument easy to find in your toolbox, a bright case is a good plus.
A decent tape measure is a must for any home remodeling project. E.g., you need to check the scale of all sorts of stuff when you’re redoing a kitchen: counters, shelves, plumbing fixtures, and the gap between electrical outlets. You’ll have to leave all the remodeling jobs to the experts if you can’t do this on your own.
Screws are connected to a variety of items in your house. They keep furniture and lamps together and attach doors to cabinets, outlet covers, and doorknobs. So, you’ll need a screwdriver to loosen the screws and bring them together any time you need to repair any of these things. Experts say this is the one tool you’ll search for more often in your toolbox.
Two standard types of screws are available: flat-head, with a single hole at the end, and Philips, with a small cross at the middle. You need both a Philips and a Flat-head screwdriver to handle each type. Ideally, to cope with screws of various shapes, you can have many of them. For $10 to $15, you can get a simple screwdriver kit with several sizes and styles. The 8-piece-screwdriver package from Craftsman is an excellent deal.
You should buy a single multi-bit screwdriver instead if you want to save a little space in your toolbox. With an array of pieces, these tools have only one handle that you can switch in if desired. It will cost as little as $5 for a basic six-in-one screwdriver, two Philips, two flat-head, and two nut-driving sides. The all-in-one screwdriver from Stanley suits the bill and the price tag.
Look for any that are durable and easy to grip, whether you settle on one screwdriver or many. If you’re going to use it a lot, the ratcheting screwdriver is worth the spring. These have unique built-in gears that help you to tighten and loosen screws even more efficiently. You can buy a well-made ratchet screwdriver for $20 to $30 with all the parts you’ll ever need. The ratcheting magnetic screwdriver from Craftsman comes with a warranty for life.
A screwdriver, like a hammer, is necessary for flat-pack furniture assembly. For other ventures around the building, it’s also vital. Replacing old electrical outlets, for example, is a relatively easy task, but without a screwdriver, there’s no way to do it. And a fancy $30 screwdriver for ratcheting would cost you a lot less than hiring an electrician.
A handsaw is essentially a connected toothed cutting blade to a stick. Since it is much quicker and easier to use than a power saw, it is useful for making shortcuts in wood. It’s also perfect for constructing a treehouse since a power saw up a ladder is not easy to bring.
The saws come in three fundamental forms. A two-foot blade in the conventional western saw that tapers from base to tip and slices as you drive the board forward. For comparison, a Japanese pull saw has a straight blade that slices as you pull it back from the wood. Pruning saws often cut on the pull stroke, but they have a slight edge for storage that folds up.
Pull saws delivered the quickest and cleanest cuts in testing at The Sweethome. It costs around $30 for a decent one, while a western saw costs just $10 to $15. Spending the extra money, though, will save you a lot of time on work cuts. A high-quality alternative is the Tajima MG-300FB Magnum Pull Saw.
Another differentiation is the number of teeth per inch between saws. For rip cuts made with the wood’s grain, six to eight teeth per inch fit well. Eight to 12 teeth per inch are better for cross cuts made against the grain. So, for making all kinds of slices, an eight-point saw is a reasonable compromise.
For all manner of small-scale construction and maintenance work, your handsaw will save you money. You can repair a board on your deck or a piece of broken trim by doing it. It is much easier than employing a carpenter to take out these boards yourself and replace them, and quicker too.
Typically, objects not fixed to nails or screws are connected to nuts and bolts. You need a screw to tighten and remove specific bolts. A flexible wrench does a better job of changing its scale and catches several different sizes of nuts.
Any experts recommend purchasing two wrenches of varying lengths. A compact six-inch wrench will work in tight spaces, while a longer 10-inch wrench allows you more strength to remove tight bolts. Costing less than $20 is a two-piece wrench kit. Even a three-piece package from WORKPRO is just about $20.
Others claim that you can make do with only one eight-inch wrench as long as it is a decent one. Look for one that has a large opening for the jaw and a comfortable handle. Once you’ve got it adjusted to the size you want, it should also be simple to change and remain put. For $25, you can get a wrench with any of these features. For about that price, Klein Tools has a very well-reviewed flexible 8-inch wrench.
This tool will save you money in a wide range of work. For a start, instead of paying a plumber, you can use it to do basic plumbing fixes at home. Instead of taking it to the garage, you can even use it to fix a bicycle. Finally, from decks to playground equipment, a wrench is handy for all sorts of large-scale construction work.